This is a follow up to the previous Pi USB/SATA drive video answering comments and giving you an alternative to the cable. This little board is pretty cool and the kit seems well thought out.
Demo of using a Raspberry Pi to monitor multiple DS18B20 1-wire digital thermometers using a Python script to report.
Steps to boot an SSD SATA hard drive w/USB adapter on a Raspberry Pi 3B/3B+ and manually resize the partition to fill the drive. Not needed for Falcon Player, but useful for write-heavy applications. The drive and adapter I used are on my Amazon Affiliate page.
This is PART 4 in a series about the 2.x version of Falcon Player – Installation. It covers manually configuring the Input/Output Setup section. For an example, I start with xLights, configure Falcon Player and show my controller settings – an end-to-end demo.
This is PART 3 in a series about the 2.x version of Falcon Player – Installation. It covers loading up sequences and audio to the Pi and setting up playlists and a schedule.
This is PART 1 in a series about the 2.x version of Falcon Player – Installation. It covers imaging an SD card and initial configuration to get things running. If covers the Raspberry Pi and BBB installations as they are similar, but a little different.