🎄P10 Panel to P5 Panel Conversion (2019)🎄

I noticed problems with the P10 panels at the end of last year and decided to upgrade to P5 panels. Simple swap of the hardware, but the software on the BeagleBone Black gave me some trouble.

🥧Raspberry Pi 3B/3B+ USB Boot Clone (2019) 🥧

See how to clone your existing Raspberry Pi SD Card to a USB boot drive!

SanDisk Extreme Pro Flash Drive: https://amzn.to/2JuVqb8

⚡️DIY Powerwall Project – ep14 – Cart Complete (2019) ⚡️

Final touches on the cart/powerwall build. Some test results. Future plans and general update.

⚡️DIY Powerwall Project – ep13 – Cart Build (2019) ⚡️

With all cell packs assembled and tested, it’s time to put it all together and see if it works!

Some Items Shown in the Video
6 Gauge Premium Extra Flexible Welding Cable https://amzn.to/2F98d0d
Install Bay Copper Ring Terminal 6 Gauge 3/8 Inch 25 Pack – CUR638 https://amzn.to/2MIHy0v
Blue Sea Systems PowerBar Dual BusBar with Two 3/8-Inch 16 Studs https://amzn.to/2F4mCeg
Polyolefin 2:1 Heat Shrink Tubing https://amzn.to/2F6XB1Y
SELTERM UL Listed Heavy Duty Wire Lugs
IWISS Battery Cable Lug Crimping Tool https://amzn.to/2F6WkrI
1/4 inch Flexo PET Expandable Braided Sleeving – BlackRed https://amzn.to/2WEpNPr
Blue Sea Systems ST Blade ATO/ATC Fuse Blocks https://amzn.to/2WMvccx
Blue Sea Systems Common BusBars (100A-250A) https://amzn.to/2X6rauB

🏭🧯🔦Honda EU2000i Propane Upgrade (2019)🥉

A propane upgrade kit can be installed in an evening allowing your existing gas generator to run on gas, propane or natural gas (trifuel). I used a kit from Hutch Mountain that had all the necessary items.

DON’T BURN YOUR HOUSE DOWN! ⚡️DIY Powerwall Project – ep12 – BMS Demo (2019) ⚡️

Explaining what a BMS is and does and shows a couple of demos on a small system. The BMS from Batrium is well-built and loaded with features.

⚡️DIY Powerwall Project – ep11 – The Cart (2019) ⚡️

Lots of stormy weather, but I got started on the battery cart. Should be able to finish up the remaining packs soon!

Blue Sea Bus Bars – https://amzn.to/2Yxo3sJ

⚡️DIY Powerwall Project – ep10 – May the 4th Be With You (2019) ⚡️

Happy Star Wars Day! As a safety measure, I got some acrylic panels to put on the outside of the packs to keep from shorting them out if they touch each other once connected. Please share the link below with friends and family.


Please share this link: http://bit.ly/dogeasteregg2019


Nylon washers: https://amzn.to/2DRR0rE